World Products, LLC | ED2 Series

World Products, LLC, Electronic Component Solutions

ED2 Series

As of May 2007, the ED2-xNUN, ED2-xSNU AND EF2-xTNU (single and dual coil latching relays) series are being listed as a non-promotional item and are not for use in new designs. Please note that non latching parts (ED-xNU, ED2-xNJ, EF2-xNU, EF2-xNUX, and EF2-xNUH) are still being promoted for use in new designs.

Download PDF (124K)

ED2/EF2 Series Data

Features

The new ED2 Series miniature signal relays are designed for use in electronic switching systems, PBXs, terminal equipment, telephone equipment and instrument equipment. This series exhibits 50 mW of ultra low power consumption.

Low power consumption (50 mW)
Applicable for the surge voltage standard of FCC (1500 V, 10 x 160 µs) and Telcordia (2500 V, 2 x 10 µs)
Through-hole mounting
Variation of dense mounting type and/or long-joint-life type for latest SMT
Compatible configuration and terminal allocation with dense mounting type of EE2 series
Upgraded soldering joint reliability between the relay terminal and PCB by optimization of the terminal configuration; 20-year-joint-life under 35°C-per-day-temperature-difference specified in IPC-SM-785 for telecommunication equipment

Applications

Electronic switching systems, PBX, terminal equipment, telephone system, instrumental equipment.

Specifications

Contact Form		2 Form C
Contact Ratings	Maximum switching power	30 W (resistive)	62.5 VA (resistive)
	Maximum switching voltage	220 Vdc	250 Vac
	Maximum switching current	1 A
	Maximum carrying current	2 A
Minimum Contact Ratings		10 mVdc, 10 µA ^*4
Initial Contact Resistance		75 mOhm typical (Initial)
Contact Material		Silver alloy with gold alloy overlay
Nominal Operating Power	Non-latch type	50 to 70 mW
	Single coil latch type	30 to 80 mW
	Double latch type	50 to 80 mW
Operate Time (Excluding bounce)		Approximately 3 ms
Release Time (Excluding bounce)		Approximately 2 ms without diode
Insulation Resistance		1000 MOhm at 500 Vdc
Breakdown Voltage	Between open contacts	1000 Vac for one minute (1500 V surge, 10 x 160 µs ^*1)
	Between adjacent contacts
	Between coil and contact	Non-latch type and single-coil latch type 1500 Vac for one minute (2500 V surge, 2 x 10 ms ^2) Double-coil latch type 1000 Vac for one minute (1500 V surge, 10 x 160 ms ^1)
Shock Resistance		735 m/s² (75 G) (misoperating) 980 m/s² (100G) (destructive failure)
Vibration Resistance		10 to 55 Hz, double amplitude 3 mm (20 G) (misoperating) 10 to 55 Hz, double amplitude 5 mm (30 G) (destructive failure)
Ambient Temperature		Non-latch type (Additional “N”): –40 to +85°C
		Non-latch type (Standard): –40 to +70°C
		Latch type : –40 to +70°C
Coil Temperature Rise		7°C at nominal coil voltage (50 mW)
Running Specifications	Nonload	1 x 10^{8 *3} operations (Non-latch type)
		1 x 10⁷ operations (Latch type)
	Load	50 Vdc, 0.1 A (resistive), 1 x 10⁶ operations at 70°C
		10 Vdc, 10 mA (resistive), 1 x 10⁶ operations at 70°C
Weight		Approximately 2.2 grams

*1	rise time: 10 µs, fall time: 160 µs
*2	rise time: 2 µs, fall time :10 µs
*3	This shows a number of operations where it can be running by which a fatal is not caused, and number of operations by which a steady characteristic is maintained is 1 x 10⁷ times.
*4	This value is a reference value in the resistive load. Minimum capacity changes depending on switching frequency and environment temperature and the load.

Dimensions

mm (inch)

Pad Layout

(bottom view) mm (inch)

Markings

Schematics

(bottom view)

Part Number System

ED2

Relay series — through hole type
Nominal coil voltage: 1.5, 3, 4.5, 5, 6, 9, 12, 24 V
Latch type: Blank: Non-latch type (see Note); S: Single coil latch type; T: Double coil latch type
Identifier: Blank: Standard type; NU: UL recognized, CSA certified type; NJ: Trimed leads (UL recognized, CSA certified type)

(UL, CSA : Under application for latch type)

Note. There are two specifications in the operating voltage of the non-latch type relay.

	Part Number	Must Operate Voltage
Additional “N” type	ED2-^NU -^NJ	75%
Standard type	ED2-^*	80%

* : Nominal coil voltage

Nominal Lineup

Non-Latch Type (Standard) at 20°C

Non-Latch Type	Nominal Coil Voltage (Vdc)	Coil Resistance (Ohm) ±10%	Must Operate Voltage (Vdc)	Must Release Voltage (Vdc)	Nominal Operate Power (mW)
ED2-1.5	1.5	45	1.2	0.15	50
ED2-3	3	180	2.4	0.3	50
ED2-4	4.5	405	3.6	0.45	50
ED2-5	5	500	4	0.5	50
ED2-6	6	720	4.8	0.6	50
ED2-9	9	1473	7.2	0.9	55
ED2-12	12	2400	9.6	1.2	60
ED2-24	24	8229	19.2	2.4	70

Non-Latch Type (Additional “N”) at 20°C

Non-Latch Type (UL and CSA approved or Trimmed leads, with UL and CSA approval)	Nominal Coil Voltage (Vdc)	Coil Resistance (Ohm) ±10%	Must Operate Voltage (Vdc)	Must Release Voltage (Vdc)	Nominal Operate Power (mW)
ED2-1.5N*	1.5	45	1.13	0.15	50
ED2-3N*	3	180	2.25	0.3	50
ED2-4N*	4.5	405	3.38	0.45	50
ED2-5N*	5	500	3.75	0.5	50
ED2-6N*	6	720	4.5	0.6	50
ED2-9N*	9	1473	6.75	0.9	55
ED2-12N*	12	2400	9.0	1.2	60
ED2-24N*	24	8229	18.0	2.4	70

Single-Coil Latch Type at 20°C

Single Coil Latch Type	Nominal Coil Voltage (Vdc)	Coil Resistance (Ohm) ±10%	Must Operate Voltage (Vdc)	Must Release Voltage (Vdc)	Nominal Operate Power (mW)
ED2-1.5S	1.5	75	1.2	1.2	30
ED2-3S	3	300	2.4	2.4	30
ED2-4S	4.5	675	3.6	3.6	30
ED2-5S	5	833	4	4	30
ED2-6S	6	1200	4.8	4.8	30
ED2-9S	9	2700	7.2	7.2	30
ED2-12S	12	4800	9.6	9.6	30
ED2-24S	24	7200	19.2	19.2	80

Double Coil Latch Type at 20°C

Double Coil Latch Type	Nominal Coil Voltage (Vdc)	Coil Resistance (Ohm) ±10%	Must Operate Voltage (Vdc)	Must Release Voltage (Vdc)	Nominal Operate Power (mW)
ED2-1.5T	1.5	S 45 R 45	1.2 -	- 1.2	50
ED2-3T	3	S 180 R 180	2.4 -	- 2.4	50
ED2-4T	4.5	S 405 R 405	3.6 -	- 3.6	50
ED2-5T	5	S 500 R 500	4 -	- 4	50
ED2-6T	6	S 720 R 720	4.8 -	- 4.8	50
ED2-9T	9	S 1620 R 1620	7.2 -	- 7.2	50
ED2-12T	12	S 2880 R 2880	9.6 -	- 9.6	50

Recommended Coil Voltage with Ambient Temperature

Non-Latch Type (Additional “N”)

Latch Type

Safety Standard and Rating

UL Recognized (UL508)* File No. E73266	CSA Certified (CSA C22.2 No. 14) File No. LR46266
30 Vdc, 1 A (Resistive) 110 Vdc, 0.3 A (Resistive) 125 Vac, 0.5 A (Resistive)

* Spacing: UL114, UL478

TUV Certified
(EN60255/IEC60255)

No.9950557

Nonlatch and Single-coil latch

Creepage and clearance of coil to contact
is over than 2 mm (According EN60950)

Basic insulation class

ED2/EF2 Series Data

Top of page

NEC Miniature Signal Relays

Notes on Correct Use

Home

World Products, LLC, 19654 8th St. East, Sonoma, CA 95476 USA
Phone: (707) 996-5201 Fax: (707) 996-3380 E-mail: sales@worldproducts.com