TVS Diode, MOV, Gas Tube

1. DC Breakdown Voltage
2. Leakage Current
3. Clamping Voltage and Surge Current
4. UL Testing
  a. (UL1414) Discharge Test
  b. (UL1449 3rd edition) Surge Test to 40ka
  c. VPR Testing at 6kv/3ka with up to 600VAC applied
  d. Abnormal Overvoltage/Limited Current testing to 10 amps
  e. I(n) testing up to 40ka at 600VAC
  f. (UL 60691) thermal ageing, dielectric and IR testing
5. Dielectric and IR testing to 5kv
6. Response Time Test
7. Impedance Measurement

Suppressors

1. Self Healing Voltage and Leakage Current
2. Capacitance
3. Dissipation Factor
4. Insulation Resistance up to 2000 Gohms
5. Surge Capability of 1.2 x 50µs, 5KV, IEC 384-14, VDE 565-1, SEV 1055
6. Surge Capability of Telcordia GR-1089, 2 x 10us.
7. Endurance Test IEC 384-14, CECC32 400, EN132400
8. Charge and Discharge Test IEC 384-14, CECC32 400, EN132400
9. ESR Measurement
10. UL 1414 (Discharge Test)

Relays

1. Fully Automated Parametric Characterization Testing
2. Surge Testing
3. Environmental Testing
4. Microscope Evaluation
5. Mechanical Life Testing
6. Contact Electrical Life Testing with Stick/Miss Detection
7. Endurance Test

Beads and Inductors

1. Impedance: 0.2 ohm to 3 Kohm at 1 MHz to 1 GHz
2. Inductance: 0.1 nHenry to 100µHenry at 100 MHz.
3. Q
4. SRF (Self Resonance Frequency) up to 5GHz

Wireless Products

1. SATIMO StarLab® 3D Near-Field Measurement System
2. RF Characterization capability from 50MHz to 13.5GHz of RF components.
3. S-Parameter Characterization.
4. Time-Domain Analysis.
5. Magnitude and Phase Analysis.
6. VSWR Measurements
7. WPI Wireless FCC certified test house services

The WPI Surge Generator meets the levels and requirements in accordance with the following
national and international standards:

• IEC 61000 4-5 -- Combination Waveform
• UL 1449 3rd edition
• IEEE/ANSI 62.41 Categories B and C
• IEC 61643-1

Surge Generator Features:

• With regards to UL 1449 3rd edition, the Surge Generator can test the I(n) sequence up to 40ka 8x20 at 600VAC.

• The Surge Generator can also test VPR at 6kv/3ka- 600VAC.

• Able to apply the surge with respect to the AC sinewave from 0 to 360 degrees.

• Includes a backfilter that protects the input 220VAC from surges going upstream and damaging other equipment.

• Fully programmable to surge as many times as one wishes with a selectable time duration in between surges.

• Test Data can be measured, stored and queried at any time. Test Reports can also be printed out.

SATIMO StarLab® 3D Near-Field Measurement System

The WP WIRELESS SATIMO StarLab® meets all industry standards for 3D measurements and testing.

• Advanced Multi-Probe 3D Electro-Magnetic Near-Field Measurement System

• Precise 3D Radiation Pattern and Efficiency Measurement Capability

• Ultra-Fast and Fully Automated EM Measurements with Unlimited Scan Resolution in both Elevation and Azimuth Planes.

• Provides Pattern Data in Linear and Circular Polarization

• Accurate Radiation Efficiency Measurements of Antenna or Antenna Systems at Several Frequencies

• Active Mode Measurement Capability (PTCRB, OTA Performance Testing)

• Antenna or Antenna Systems that operate in several Technologies/Frequency Bands such as GSM/GPRS/DCS/PCS/UMTS, WCDMA, CDMA, GPS, WiMax, RFID, ISM Band, UWB can be subjected to test successfully.